12V - 24V short circuit protection Tamiya male connector Standard NiMH Battery Charger
Features and Benefits
-
Universal Fast and Smart Charger is designed for charging any 12V-24V NiMH and NiCd Battery Packs. (10-20 Cells pack)
-
100-240V AC input for worldwide use.
-
The charger can cut-off power Automatically by negative delta V IC when battery pack is fully charge.
-
Two current levels, 0.6A and 1.2A, are selectable by a switch for either higher or lower capacity battery pack.
-
For battery pack between 3300mah and 500 mah, please use the low level switch -- charging rate: 0.6A
-
For battery pack over 3300 mAh, please use the high level switch -- charging rate: 1.2A
-
Approximate, Charging time( hours) = Battery capacity ( Ah) / charging current ( A).
-
If possible, always choose charging current in 0.6A to slow charging , which is good for battery and charger service life.
-
Protection fuse for over current, short circuit & reverse polarity protection.
-
Charging time can be estimated as the follow:
Charging time ( Hrs ) = 1.2xBattery capacity ( mAh) / Charging current ( 0.6A or 1.2A )
-
One standard Tamiya male connector installed with the charger.
-
One set connector adaptor from female tamiya to Clips is included for charging any battery packs.
-
It is a very smart charger. Just plug it in and wait for the battery to get charge.
-
The charger is designed for fast charging any 24V Nicd and NiMH battery packs. Ideal for 24V battery pack for E-bike, E- scooter and hunting light
-
Dimension: 1.5"H X 2.36"W X 4.67"L.
-
Weight: 0.6LB.
IMPORTANT NOTICE: In order for charger to function properly, please have temperature sensor connected to the charger at all times. The actual sensor does not necessarily need to be attached to the battery, though, while charging battery pack.
